Optipoint Serial Treiber Insurance

Posted on by

This is the RS232 driver for the USB adapter. In order to setup the driver you need to download the correct USB driver file and run the installer in the file.

Optipoint Serial Treiber Insurance

Once this has been installed you then need to reboot the computer. Once this is done plug the USB into the adapter.

You have to connect easily and help as the serial of siemens optipoint 500 and the response to this wealthy over much heads. Payment Protection Insurance. Download the latest drivers for your Siemens USB devices to keep your Computer up-to-date.

Common Problems: Windows 2000: • Right-click on the “Prolific USB to Serial Port”, then click Properties. • Now click on “Port Settings”. Then click the “Advanced” button.

• Always uncheck “Use automatic settings”. • Now select “Input/Output range”. Berger Seeing Is Believing Pdf To Jpg. Click on the “Change Settings” option. • Type “02E8-02EF” in the Value box.

This value will change the port to COM 4. If COM 4 is in use, you must choose another port. The values for each port are. • COM 1: 03F8-03FF • COM 2: 02F8-02FF • COM 3: 03E8-03EF • COM 4: 02E8-02EF Enter the value, then click OK. Click OK again, then click Yes when the “Creating a Forced Configuration” window appears.

Windows Generic: If you are having problems then check if you have installed the driver correctly. This is done by doing the following on your computer to check the installation. If the USB driver has been properly installed, “Serialio.com USB Serial Port” or “Prolific USB-to-Serial COM Port” will be displayed. Windows Vista: Start >>Control Panel >>System >>Hardware >>Device Manager.

This is the RS232 driver for the USB adapter. In order to setup the driver you need to download the correct USB driver file and run the installer in the file.

Once this has been installed you then need to reboot the computer. Once this is done plug the USB into the adapter. Common Problems: Windows 2000: • Right-click on the “Prolific USB to Serial Port”, then click Properties. • Now click on “Port Settings”. Then click the “Advanced” button. • Always uncheck “Use automatic settings”.

• Now select “Input/Output range”. Click on the “Change Settings” option. • Type “02E8-02EF” in the Value box. This value will change the port to COM 4. If COM 4 is in use, you must choose another port. The values for each port are.

• COM 1: 03F8-03FF • COM 2: 02F8-02FF • COM 3: 03E8-03EF • COM 4: 02E8-02EF Enter the value, then click OK. Click OK again, then click Yes when the “Creating a Forced Configuration” window appears. Windows Generic: If you are having problems then check if you have installed the driver correctly.